BIAXIAL RESPONSE OF RUBBER AND RAT RIGHT-VENTRICLE TISSUE

Autores/as

  • Joao Vitor da Silva Moreira Universidade do Vale do Paraíba
  • Daniela Valdez-Jasso Universidade do Vale do Paraíba

DOI:

https://doi.org/10.18066/revistaunivap.v22i40.1672

Resumen

The objective of this study is to evaluate the differences in deformation presented by a latex material and a Rat Right-Ventricle tissue under biaxial loading. In order to perform the testing, it was used a planar biaxial loading technique, and the collected data was used to measure the stretching response of each material. The samples were stretched in both directions (x and y axis) at the same time, until the reference markers placed on the materials reached a deformation of 10 % of its original distance from the initial position. Isoparametric mapping was used to analyze the markers displacement, and according to the results, it was possible to map the deformation response of both types of material, and correlate that to its mechanical properties.

Descargas

Los datos de descargas todavía no están disponibles.

Biografía del autor/a

Joao Vitor da Silva Moreira, Universidade do Vale do Paraíba

Department of Biomedical Engineering, UNIVAP, Sao Jose dos Campos (SP) - Brazil.

Department of Bioengineering, UIC, Chicago (IL) - USA

Descargas

Publicado

2017-05-11

Cómo citar

Moreira, J. V. da S., & Valdez-Jasso, D. (2017). BIAXIAL RESPONSE OF RUBBER AND RAT RIGHT-VENTRICLE TISSUE. Revista Univap, 22(40), 902. https://doi.org/10.18066/revistaunivap.v22i40.1672

Número

Vol. 22 Núm. 40 (2016): Revista Univap online Edição Especial XX Encontro de Iniciação Científica, XVI Encontro de Pós-Graduação, X INIC Jr e VI INID da Universidade do Vale do Paraíba / ISSN 2237-1753

Sección

Resumo - INIC

Licencia

Licença Creative Commons
Este trabajo está licenciado bajo una Licencia Creative Commons Atribuição 4.0 Internacional.

Esta licencia permite que otros distribuyan, remezclen, adapten y creen a partir de su trabajo, incluso con fines comerciales, siempre que se otorgue el crédito correspondiente por la creación original.
http://creativecommons.org/licenses/by/4.0/legalcode