BIAXIAL RESPONSE OF RUBBER AND RAT RIGHT-VENTRICLE TISSUE
DOI:
https://doi.org/10.18066/revistaunivap.v22i40.1672
Resumo
The objective of this study is to evaluate the differences in deformation presented by a latex material and a Rat Right-Ventricle tissue under biaxial loading. In order to perform the testing, it was used a planar biaxial loading technique, and the collected data was used to measure the stretching response of each material. The samples were stretched in both directions (x and y axis) at the same time, until the reference markers placed on the materials reached a deformation of 10 % of its original distance from the initial position. Isoparametric mapping was used to analyze the markers displacement, and according to the results, it was possible to map the deformation response of both types of material, and correlate that to its mechanical properties.
Downloads
Não há dados estatísticos.
Downloads
Publicado
2017-05-11
Como Citar
Moreira, J. V. da S., & Valdez-Jasso, D. (2017). BIAXIAL RESPONSE OF RUBBER AND RAT RIGHT-VENTRICLE TISSUE. Revista Univap, 22(40), 902. https://doi.org/10.18066/revistaunivap.v22i40.1672
Edição
Seção
Resumo - INIC
Licença
Esse trabalho está licenciado com uma Licença Creative Commons Atribuição 4.0 Internacional.
Esta licença permite que outros distribuam, remixem, adaptem e criem a partir do seu trabalho, mesmo para fins comerciais, desde que lhe atribuam o devido crédito pela criação original.
http://creativecommons.org/licenses/by/4.0/legalcode
DOI:
https://doi.org/10.18066/revistaunivap.v22i40.1672Resumo
The objective of this study is to evaluate the differences in deformation presented by a latex material and a Rat Right-Ventricle tissue under biaxial loading. In order to perform the testing, it was used a planar biaxial loading technique, and the collected data was used to measure the stretching response of each material. The samples were stretched in both directions (x and y axis) at the same time, until the reference markers placed on the materials reached a deformation of 10 % of its original distance from the initial position. Isoparametric mapping was used to analyze the markers displacement, and according to the results, it was possible to map the deformation response of both types of material, and correlate that to its mechanical properties.Downloads
Downloads
Publicado
Como Citar
Edição
Seção
Licença
Esse trabalho está licenciado com uma Licença Creative Commons Atribuição 4.0 Internacional.
Esta licença permite que outros distribuam, remixem, adaptem e criem a partir do seu trabalho, mesmo para fins comerciais, desde que lhe atribuam o devido crédito pela criação original.
http://creativecommons.org/licenses/by/4.0/legalcode